About the Bose FreeSpace 360P II

Key Features

• Full-range environmental loudspeaker with one downward firing
  4.5" (114 mm) advance composite environmental full-range driver for in- ground or above-ground mounting 
• Domed port grille reflects sound into the listening area for clear, consistent performance 
• Cabinet shape acts as acoustic diffuser directing mid- and high- frequency energy out towards listeners. Base of loudspeaker acts as a tuned, multi-chambered ported enclosure 
• Multi-tap line transformer provides easy-to-change tap settings 
• Tamper-resistant design 
• Internal speaker protection circuit safeguards drivers

Product Overview
The Bose FreeSpace 360P Series II is a full-range environmental loudspeaker designed to blend with landscaping for in-ground or above-ground applications, such as shopping malls, outdoor restaurants, resorts and theme parks. It features 360° of horizontal coverage and frequency range down to 60 Hz.

Technical Specifications 

System Performance

Frequency Response (+/-3 dB)¹: 70 Hz - 10 kHz

Frequency Range (-10 dB)¹: 60 Hz - 15 kHz 

Nominal Dispersion: 360° H x 50° V

Recommended High-Pass Filter: 60 Hz high-pass filter 

Loudspeaker EQ: Recommended

Overload Protection: PTC 

Long-Term Power Handling²: 80 W (320 W peak)

Sensitivity (SPL / 1 W @ 1 m)³: 87 dB SPL 

Maximum SPL @ 1 m⁴: 100 dB SPL (106 dB SPL peak) 

Nominal Impedance: 4 Ω (transformer bypassed) 

Transformer Taps (70/100 V): 10 W, 20 W, 40 W, 80 W

Transducers

Driver Compliment: 4.5" (114 mm) Bose® environmental driver

Physical

Enclosure: Glass-reinforced polypropylene, textured 

Environmental: Outdoor per IEC 529 IP35 

Connectors: External multi-wire cable with wire nuts included 

Suspension / Mounting: Three (3) #10 (M4) holes in base. Three #10 M4 screws required 

Dimensions: Diameter: 14.5" (368 mm)

Height: 14.9" (379 mm)

Net Weight: 14.5 lb (6.6 kg) 

Shipping Weight: 14.9 lb (6.8 kg)

Product code

Green 040151

Footnotes:

• 1  Frequency response measured 30° above the ground plane (per recommended installation) in an anechoic environment. 
• 2  Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ. 
• 3  Sensitivity. 70Hz-15kHz pink noise is applied to the speaker and amplified to a level at the loudspeaker terminals corresponding to 1 watt as referenced to the nominal impedance. The average sound pressure level
  is measured at 1 meter, 30° above the ground plane. 
• 4  Max SPL. Calculated level for sine wave is obtained by adding 10*log(W tap ) to the measured sensitivity of the speaker.